The facts
- optimal homogeneity due to isostatic high pressure manufacturing process allows bar restorations, bridges with up to 14 pontics and delicate elaboration in familiar, dental technical execution
- non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/ Cr alloys
- high yield due to big surface and small shrinkage – up to 40 units in a blank
- only 8,5% shrinkage due to unique, isostatic high pressure manufacturing process with optimal homogeneity – no distortion during sintering
- familiar blank height in 10mm/ 12mm/ 14mm/ 16mm/ 18mm und 20mm
- minimal wear of burs due to soft, but milling resistant material structure – therefore often called soft metal
- optional wet- or dry processing possible using a wax strategy
| Blanks from 12 mm with Step | Unit |
| CopraSintec K CoCr-Blank 98 Ø x 10 mm | 1 |
| CopraSintec K CoCr-Blank 98 Ø x 12 mm | 1 |
| CopraSintec K CoCr-Blank 98 Ø x 14 mm | 1 |
| CopraSintec K CoCr-Blank 98 Ø x 16 mm | 1 |
| CopraSintec K CoCr-Blank 98 Ø x 18 mm | 1 |
| CopraSintec K CoCr-Blank 98 Ø x 20 mm | 1 |
